Search Results

Starting with the statement that command of the air in warfare rests largely with the side that produces the best single-seater fighter, the author proceeds to outline some of the problems confronting the designer of fighting airplanes, and particularly the smaller ones. Considering better performance and better fighting qualities as the main desiderata, the author discusses means of obtaining them by: (1) increasing the horsepower-weight ratio; (2) decreasing the wing or structure resistances; (3) devising a new arrangement of the supporting planes, with regard to the position of pilot or crew, or by a combination of the above. Considerable space is devoted to methods of decreasing wing resistance, principally by employing low-resistance aerofoils, and the shaping of wing tips is also referred to.

The authors outline some of the problems that confront the automobile engineer today, showing how the demand for better performance and economy and the ever-increasing cost of volatile fuels has emphasized the necessity for thorough engineering work in the successful automobile manufacturing plant. Believing that the accurate analysis of the heat distribution in a modern automobile engine will be of great value, the authors describe a comprehensive test, made under their direction, of such an engine. This test includes measurements of the brake horsepower, friction horsepower, fuel consumption and heat losses to jackets, exhaust and cooling air. The engine tested was inclosed in a hood, similar to that used on the car in normal service and an air blast was directed through this hood at speeds approximating those at which the engine would drive a car with a given gear ratio.

The author states that the objects of the paper are to define and trace the development of the various processes of carburetion, and to offer such suggestions along these lines as may assist the investigator in developing motorboats, automobiles and self-contained unit motor cars for railway purposes. The surface carburetor is mentioned chiefly as of historic interest. In considering the jet carbureter the author discusses the proportion of gas desired, the effect of the varying inertia of the air and the liquid gasoline and the breaking up of the combustible needed. Following sections review the devices for using kerosene, such as gasoline jet carbureters to which heat is applied, devices of the fixed gas type, the introduction of combustible directly into the cylinder, forcing combustible directly upon a hot surface in the cylinder and devices which raise the combustible to the boiling point.

Inasmuch as horses cannot meet the demand for increased farm power, the tractor must come at once. So far the supply of tractors has been entirely inadequate to meet the demand. The author specifiies some of the problems that confront designers of farm tractors. To make the tractor immediately available for farm work, it must be adaptable to practically all of the existing types of horse-drawn implements, besides furnishing belt power for a wide variety of present power-driven farm machinery. In designing tractors it must be remembered that the horse is a very flexible unit, capable of a wide variation in power output. Designing a tractor to furnish the necessary power for the majority of farm conditions, requires an intimate knowledge of crops, soils and farm management. These must be analyzed carefully so as to make the machine have as wide a range of usefulness as possible.

The paper opens with a number of quotations from publications issued by the Army War College and showing the bearing of motor transport on a proper military policy for the United States. The author then describes two experimental trips recently made by motor-truck owners near New York in an effort to determine proper motor-transport operating conditions. A statistical summary is given for these two experimental trips. The Army War College has issued in compliance with instructions of the Secretary of War a “Statement of a Proper Military Policy for the United States,” supplemented by a number of pamphlets dealing with particular features of this military policy in considerable detail. In many of these supplementary pamphlets there appears a considerable amount of material bearing upon the subject of motor transport and from them the brief quotations in the following paragraphs are taken.

The author outlines the constructions that have performed cially that four-cylinder engines carried under a hood are the most satisfactory. The defects revealed by war service are given in considerable detail, the author finding that all of the trucks used had developed some weak point. Radiators and springs are specified as a general source of trouble. The author outlines a number of operating troubles developed under the existing conditions of operation and gives examples of the way these have been remedied. Considerable attention is paid to the methods of operating trucks away from made roads. The methods of fitting chains to the wheels, and the use of caterpillar attachments are described. Dimensions are given for bodies and a number of suggestions made as to their proper construction.

The question as to whether a part should be made or bought is one that must be settled by the individual maker according to the value of his product, the nature of the part, his capital available for manufacturing purposes and the price at which his product is sold. The author describes the practice followed by some of the large companies, showing that in spite of their being quantity producers, they have found it desirable to buy a number of important parts. Certain parts are rarely made by automobile manufacturers, either because they can be bought more cheaply or because the machinery to produce them is intricate. The author sums up the problem by stating that a manufacturer makes the unit on account of not getting deliveries or because he does not get a fair price from the parts maker or an article good enough to satisfy his conditions. In order to give individuality to the product, the car maker often produces certain parts, such as the engine, himself.

The author gives a brief review of developments during the past year in the construction of aeroplanes, particularly as affected by the European War. He takes as an example the Renault twelve-cylinder engine, citing the respects in which the present differs from previous models. Such factors as the changes in cooling systems, method of drive, valve construction and starting devices are considered. The requirements of aeroplane engines, such as constant service, high speeds (of aeroplanes) and stream-line form of engines and radiators, are outlined. Propeller requirements are dealt with at length, curves being given by which the efficiency and diameter of the propeller can be obtained. In conclusion a number of different engine installations are illustrated and compared.

This paper is mainly an argument in favor of the use of large, single rear wheel truck tires instead of smaller dual tires. Although the practice of using large singles is comparatively new, the author gives the results of experience and research to show the advantages of the newer method of rear tire equipment. In developing his arguments in favor of single tires, the author goes into the history of dual tire application to show why it was necessary to use two tires in the earlier days of truck operation. As the necessity for increased carrying-capacity grew, tire manufacturers found the then existing single tire equipment inadequate, and they set about to develop suitable equipment to meet the new condition, the result being dual practice. The method of attaching the earlier dual tires is shown to have been poor, resulting in circumferential creeping of the whole tire to a much greater extent as the width of the dual equipment increased.